Error en servidor ML110 G7 (solución del ventilador no es suficiente)

[calumine]

Hola buenas tardes soy nuevo en este foro y queria consultar porque me sale fan solution not sufficient (solución del ventilador no es suficiente) me muestra una temperatura de c20, y se apagar desde ya muchas gracias.

[josepesv · Accepted solution]

Revisa físicamente los ventiladores, además de suciedad podría estar algo obstruyendo el trabajo de alguno.

[terminator]

Holacalumine  

HP ProLiant Server - Fan Failure, Fan Solution Not Sufficient, Temperature Violation Detected, 1610,...

Any of the following error messages at POST:

• Fan Solution Not Sufficient.

• Fan Solution Not Fully Redundant.

• High Temperature Condition detected by Processor X.

• Temperature violation detected - system Shutting Down in X seconds.

• 1610-Temperature Violation Detected. - Waiting 5 Minutes for System to Cool.

• 1611 Fan X is not present (where "x" is the fan location).

• 1611 Fan X failure detected (where "x" is the fan location).

Possible causes:

• One or more fans in the server have failed.

• Fan connector or slot failed.

• Insufficient fans installed.

• Heat sink not installed.

• BIOS or iLO Firmware.

Solution

• Check IML Log from iLO or SMH for any fan failure or temperature violation.

• Check System Insight Display for any amber led on fan.

• Always allow adequate ventilation.

• Always populate the racks with blanking panels and the enclosures with blade blanks.

• Always populate the server with air baffles, blanks, and heat sinks.

• Always operate the server with the access panel installed.

• In rare scenarios a firmware update might fix the issue.

Manual:

http://h10032.www1.hp.com/ctg/Manual/c02790685.pdf

Salu2 

---------------------------------------------------------------------------------------------------------------------------------------

Si te ha sido útil, presiona la estrella de" kudos". Si se ha resuelto el problema, acepta como "solución

[calumine]

muchas gracias gente por la info el servidor es nuevo encontre que tenia un ventilador desconectado muchas gracias problema resuelto