cancelar
Mostrando los resultados de 
Buscar en lugar de 
Quiere decir: 
  • ×
    Información
    Corrija errores en Win 10

    Resuelva problemas de actualización de Windows 10 en un PC HP – haga clic aquí

  • post a message
  • ×
    Información
    Corrija errores en Win 10

    Resuelva problemas de actualización de Windows 10 en un PC HP – haga clic aquí

  • post a message
ArchivadoEste tema fue archivado. La información y enlaces disponibles en este mensaje pueden no ser relevantes o estar desactualizados. Si tienes dudas, por favor, haz clic aquí para crear un nuevo tema y selecciona la carpeta apropiada.
Highlighted
Estudiante
Estudiante
1 0 0
Mensaje 1 de 2
1.150
Reportar Mensaje

NO ENCIENDE MI SERVIDOR HP PROLIANT ml110 g7

Cuando conecto el cable de poder al tomacorriente, comienza a sonar el ventilador bien fuerte, se enciende una luz azul en la parte de atras que dice UID y en la parte delantera también, en la fuente de poder le brilla una luz amarilla.

Que podrá ser.¡????

1 RESPUESTA 1
Highlighted
Rector Rector
Rector
9,438 653 3,557
Mensaje 2 de 2
Reportar Mensaje

NO ENCIENDE MI SERVIDOR HP PROLIANT ml110 g7

Este post en inglés habla de ese caso:

 

The Unit Identification Light (UID)
------------------------------------

The UID helps you identify and locate a system, especially in high-density rack environments. Additionally, the UID is used to indicate that a critical operation is underway on the host, such as Remote console access or ROM flash.
In general, you control the state of the UID using the UID controls or using the physical UID button on the front of your system (or the back, if supported).

The "current state" (on or off) of the UID is the last state chosen using one of these methods. If a new state is chosen while the UID is blinking, this new state becomes the current state, and takes effect when the UID stops blinking.

NOTE: The Unit ID Light web page does not automatically refresh itself if the state of the actual light changes after the page is loaded. To insure the page accurately reflects the state of the UID Light, click on the Virtual Indicators link to update the page.


UID is blinking

The following circumstances cause the UID to blink:

Remote Console is currently active.
Upgrade of iLO Firmware is in progress.
The UID continues to blink until the circumstances causing it to blink subside. The UID reverts to the current state when the cause of the blinking is gone.


Turn Unit ID On

Clicking this button sets the current state of the UID On. However, blinking the UID overrides this state until the cause has subsided.
The UID current state can also by toggled by pressing the physical button on the front of your system (or on the back, if supported). The UID is blue when lit.


Turn Unit ID Off

Clicking this button sets the current state of the UID Off. However, blinking the UID overrides this state until the cause has subsided.
The UID current state can also be toggled by pressing the physical button on the front of your system (or on the back, if supported). The UID has no color when it is off.
--------------------------------------------

0 kudos
ArchivadoEste tema fue archivado. La información y enlaces disponibles en este mensaje pueden no ser relevantes o estar desactualizados. Si tienes dudas, por favor, haz clic aquí para crear un nuevo tema y selecciona la carpeta apropiada.
† Las opiniones expresadas arriba son opiniones personales del autor, no de HP. Al utilizar este sitio, acceptas a los Términos de Uso y a las Reglas de Participación