hp 6005 mt password con @

[askatuak]

Tenemos 15 hp 6005 MT, puse en dos de ellos password en bios, no para el arranque, no para el acceso a bios.

Puse una arroba o eso creo, y son incapaz a poner la arroba. Probe asccii, teclado usb, telcado ps2...

Tiene una pestañita que se mueve en el clear cmos.

Que se os ocurre? Los equipso estan fuera de garantia ya... hace 1 año.

un saludo.

[jperl]

http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/HP-Compaq-6005-Pro-SFF-PC-A-student-has-pas...

[askatuak]

osea.... placa nueva.

Creo que probe lo de la guia, y nada.

Juraria que le puse   pepe@8787

Pero no me deja poner @.... puede ser que deje poner@, y luego no poder escribirla?

probe a poner pepe8787 y nada.

Resetting the Password Jumper
To disable the power-on or setup password features, or to clear the power-on or setup passwords,
complete the following steps:
1.
Shut down the operating system properly, then turn off the computer and any external devices,
and disconnect the power cord from the power outlet.
2.
With the power cord disconnected, press the power button again to drain the system of any residual
power.
WARNING!
To reduce the risk of personal injury from electrical shock and/or hot surfaces, be
sure to disconnect the power cord from the wall outlet, and allow the internal system components
to cool before touching.
CAUTION:
When the computer is plugged in, the power supply always has voltage applied to
the system board even when the unit is turned off. Failure to disconnect the power cord can result
in damage to the system.
Static electricity can damage the electronic components of the computer or optional equipment.
Before beginning these procedures, ensure that you are discharged of static electricity by briefly
touching a grounded metal object. See the 
Safety & Regulatory Information
 guide for more
information.
3.
Remove the computer cover or access panel.
4.
Locate the header and jumper.
NOTE:
The password jumper is green so that it can be easily identified. For assistance locating
the password jumper and other system board components, see the Illustrated Parts & Service Map
(IPSM) for that particular system. The IPSM can be downloaded from 
http://www.hp.com/
support
.
5.
Remove the jumper from pins 1 and 2. Place the jumper on either pin 1 or 2, but not both, so that
it does not get lost.
6.
Replace the computer cover or access panel.
7.
Reconnect the external equipment.
8.
Plug in the computer and turn on power. Allow the operating system to start. This clears the current
passwords and disables the password features.
9.
To establish new passwords, repeat steps 1 through 4, replace the password jumper on pins 1 and
2, then repeat steps 6 through 8. Establish the new passwords in Computer Setup. Refer to the
Computer Setup (F10) Utility Guide
 for Computer Setup instructions

R

[jperl]

Hola.

A la espera de otras respuestas de otros usuarios, generalmente Para crear la contraseña, utilice únicamente caracteres alfanuméricos como A-Z, a-z, 0-9.

No se si dejando un espacio en su lugar o dos  ????.

Supongo que probo sacando la pila de la Bios.

En algunos modelos de pc si se equivoca tres veces en la clave le devuelve una numeración :  http://bios-pw.org/

[jperl]

Guía de HP ProtectTools Security Manager - Hewlett-Packard 

h10032.www1.hp.com/ctg/Manual/c00818638

2 HP BIOS Configuration for ProtectTools. Conceptos ..... biométricos. Credential Manager admite también métodos de autentificación alternativos, facilitando la ...Substituya caracteres especiales o números por letras en una palabra clave.

Portátiles HP: no se admiten determinados caracteres para ... 

h20564.www2.hp.com/hpsc/doc/public/display?docId=emr...

22 nov. 2011 - Ejemplo de mensaje de error: La contraseña contiene caracteres que no ... El BIOS de arranque previo y el cifrado de unidad admiten un  ...

[askatuak]

Pero como puede ser que ponga una @, y sea imposible ponerla.....

Lei por ahi, probando con teclado ps2, usb, ASCII...

Estoy casi convencido que puse la @, de echo probare en otro pc igual que tengo (Sin grabar claro jejejej)

en fin, que no me coja la @ vaaale, pero no me dejes escribirla. Por que lo probé sin arroba, mayusculas y minusculas y nada.

El lunes llamo a HP, a ver q me cuentan, pero al ser gama empresa.... me temo  y en principio lo veo, bien, que para saltarse el arranque sea duro, pero vamos... si el HD está sin encriptar, sirve de relativo poco, salvo que ese pc por MAC, u otra tipo de mochila, sea acceso a una aplicacion de explotar cohetes 😄

curioso lo de la arroba.

Os cuento

[jperl]

OK.

Espero se solucione.

Saludos.

[askatuak]

Se arregló más fácil que todo eso.

Es una placa base con SPARE: 31966-001, hay un jumper VERDE, que lo quitas, arrancas el equipo, y vuaaala.

En fin, la solución era como siempre digo yo a los clientes con las impresoras sobre liberar el papel, DONDE ESTE VERDE O NARANJA, tirar con cuidad y liberar 😄

La guia de servicio dice:

To disable the power-on or setup password features, or to clear the power-on or setup passwords,
complete the following steps:
1.
Shut down the operating system properly, then turn off the computer and any external devices,
and disconnect the power cord from the power outlet.
2.
With the power cord disconnected, press the power button again to drain the system of any residual
power.
WARNING!
To reduce the risk of personal injury from electrical shock and/or hot surfaces, be
sure to disconnect the power cord from the wall outlet, and allow the internal system components
to cool before touching.
CAUTION:
When the computer is plugged in, the power supply always has voltage applied to
the system board even when the unit is turned off. Failure to disconnect the power cord can result
in damage to the system.
Static electricity can damage the electronic components of the computer or optional equipment.
Before beginning these procedures, ensure that you are discharged of static electricity by briefly
touching a grounded metal object. See the 
Safety & Regulatory Information
 guide for more
information.
3.
Remove the computer cover or access panel.
4.
Locate the header and jumper.
NOTE:
The password jumper is green so that it can be easily identified. For assistance locating
the password jumper and other system board components, see the Illustrated Parts & Service Map
(IPSM) for that particular system. The IPSM can be downloaded from 
http://www.hp.com/
support
.
5.
Remove the jumper from pins 1 and 2. Place the jumper on either pin 1 or 2, but not both, so that
it does not get los

[jperl]

Gracias por comentarlo, marque solucionado.

Saludos.